Frame Straightening & Structural Repair in Hollywood, FL
Car Geeks Collision inspects and repairs frame, unibody, and structural collision damage in Hollywood, Florida. The repair plan for each vehicle depends on its construction, the damage measured during inspection, and the repair procedures published by the manufacturer.
We Coordinate Documentation With Insurance Carriers
Vehicle Construction
Full-Frame, Unibody, and Structural Components
How a vehicle is built determines how structural damage is evaluated and what repair options are available.
Full-Frame Vehicles
Many trucks and larger SUVs use a separate ladder frame with the body mounted on top. Damage is evaluated on the frame rails, crossmembers, and body mounts.
Unibody Vehicles
Most cars and crossovers use a unibody, where the body panels and structure are integrated. Damage in one area can shift reference points elsewhere in the shell.
Structural Components
Rails, aprons, rockers, pillars, floor pans, strut towers, and suspension mounting points carry load. These are evaluated separately from cosmetic panels.
Structural Work We Perform
Frame and Unibody Repair Planned Per Vehicle
Each of the following is scoped after inspection, based on the vehicle's construction and the repair procedures that apply to it.
Computerized Measurement
Car-O-Liner equipment and computerized measurement tools are used to compare reference points against published vehicle data when measurement is appropriate.
Unibody Structural Repair
Controlled pulling and repair of unibody structures, planned around the manufacturer procedures that apply to the specific vehicle.
Full-Frame Repair
Inspection and repair of body-on-frame trucks and SUVs, including sectioning or replacement where the applicable procedure calls for it.
Suspension Mounting Areas
Evaluation of strut towers, subframe mounts, and suspension attachment points that may be affected by a collision.
Rocker & Pinch Weld Repair
Repair of rocker panels, pinch welds, and floor sections following the joining methods specified for the vehicle.
Post-Collision Structural Review
Documented inspection after moderate and severe collisions, with findings recorded before repairs are authorized.
Alignment & ADAS Evaluation
Wheel alignment and ADAS calibration are evaluated case by case and performed when the vehicle and repair require them.
Diagnostic Scanning
Pre-repair and post-repair scanning is performed when the vehicle or the applicable repair procedure calls for it.
Aluminum Structures
Aluminum structural work is confirmed case by case based on vehicle construction, required procedures, equipment, and repair feasibility.
Inspection Triggers
When a Structural Inspection May Be Needed
These situations are reasons to have a vehicle inspected. They do not confirm structural damage on their own — only an inspection and, where appropriate, measurement can determine that.
- The vehicle was involved in a collision impact, including impacts that left limited visible damage.
- Panel gaps look uneven, or doors, the hood, or the trunk no longer close as they did before.
- The steering feels off-center, or the vehicle pulls to one side.
- Tire wear appears abnormal or uneven.
- There is visible damage to a frame rail, apron, rocker, or other structural area.
- Suspension mounting areas show damage or displacement.
- An insurer or a published repair procedure requires structural measurement before repairs.
If any of these apply, you can request an estimate or contact Car Geeks Collision to schedule an inspection.
What You Receive
What a Structural Inspection Includes
Not every step applies to every vehicle. What is performed depends on the vehicle, the damage found, and the repair procedures that apply.
- A visual inspection of the affected areas of the vehicle.
- Vehicle identification and a review of the manufacturer repair procedures that apply.
- Computerized measurement using Car-O-Liner equipment when measurement is appropriate for the vehicle and damage.
- Documented findings from the inspection.
- A written repair plan and estimate.
- Post-repair measurement or verification when applicable to the repair performed.
- An alignment or ADAS evaluation when the vehicle and repair require it.
Any applicable workmanship warranty for the repair will be explained to you in writing before the vehicle is delivered.
How We Work
How Car Geeks Collision Approaches Structural Repair
Vehicles We Inspect
Brands We See for Structural Work
Repair options for a specific brand or model are confirmed case by case based on vehicle construction, required procedures, equipment, and repair feasibility.
Our Process
From Inspection to Written Repair Plan
- Step 01
Intake & Visual Inspection
The vehicle is identified and the affected areas are inspected and documented.
- Step 02
Procedure Review
Published manufacturer repair procedures for that vehicle are reviewed before a plan is written.
- Step 03
Disassembly As Needed
Panels, trim, and components are removed where access to structural areas is required.
- Step 04
Computerized Measurement
When appropriate, reference points are measured with Car-O-Liner equipment and computerized measurement tools.
- Step 05
Written Repair Plan
Findings and the proposed repair plan are documented in a written estimate for your review.
- Step 06
Structural Repair
Repair, sectioning, or replacement is performed according to the procedures that apply to the vehicle.
- Step 07
Verification & Delivery
Post-repair measurement or verification, and alignment or ADAS work, are completed when applicable before delivery.
Structural work is often part of a broader repair. See our collision repair service, ADAS calibration, and the repair process we follow.
FAQ
Frame Straightening Questions
Serving South Florida
Structural Repair Across South Florida
Car Geeks Collision provides frame, unibody, and structural repair for drivers across Hollywood, FL, Pembroke Pines, FL, Miramar, FL, Davie, FL, Cooper City, FL, Aventura, FL, Hallandale Beach, FL, Sunny Isles Beach, FL, Fort Lauderdale, FL, Weston, FL. Our facility is located in Hollywood, FL. See all service areas.
Request a Frame Inspection
Start With a Measured Repair Plan
Car Geeks Collision inspects the vehicle, reviews the manufacturer procedures that apply, measures with Car-O-Liner equipment when appropriate, and documents the findings in a written repair plan and estimate.
Visit: 2133 Pembroke Rd, Hollywood, FL 33020
Related: Collision Repair · ADAS Calibration · Insurance Claims · Our Process · Contact · Request an Estimate
Request an Inspection
Tell us what happened and we will follow up to schedule an inspection.